Home > RC Trucks > 1/8 Trucks
1/8 Giga Crusher Twin/dual Force MT .28CC engines RTR
in stock now
With radio transmitter, 3 speeds.
Yes, this truck reverses.
New in Box
Pay with Paypal
This is not a Kyosho but is even better than the Kyosho dual force
radio transmitter is included
the truck does reverse
You will be amazed !!!
Incredible power !!!
A must absolutely have
No assembly required
Please note:
This is NOT the Kyosho Giga Crusher twin force .26cc engines. This is the Giga Crusher twin force.28CC truck.
The Twin Force .28cc engine is ready, available here and waiting for you to turn up the heat in your backyard or on the track! (Transmitter is also included )
four-wheel independent suspension, fixed upper camber links, a heavily reinforced and braced chassis that's virtually flex free, and a full set of metal shielded ball bearings.
Both the receiver and receiver battery are housed in their own separate, sealed boxes on the right and left side of the chassis, and a thick roll-cage/carrying handle assembly protects the twin engine heads from rollovers.
All the features you'd expect are there, plus a few you may not have seen coming.
Helical Cut Diffs • Handling all the abuse of a 16 pound monster truck with dual .28 engines is asking a lot of any drivetrain, so this truck (NOT A KYOSHO) supplied the Giga Crusher with its heavy-duty 1/8-scale buggy size differentials.
Built with hardened steel outdrives and durable cast internal gears, the G-Crusher's diffs receive an additional upgrade in the form of helical-cut ring and pinion gears.
The angled helical cuts not only increase durability, they also reduce drivetrain noise and allow the diffs to spin smoothly and quietly
THE TRANSMITTER IS INCLUDED !!!
1/8 SMARTECH Minotaur King Off Road MT w/18CXP, 2.4G RadioRTR
1/8 SMARTECH Minotaur King RTR
Pay with Paypal
FEATURE:
Oil-dampened suspension travel.
Ready-to-run.
Nitro 4-wd.
2-speed transmission.
Assembled chassis.
18cxp engine.
Front and rear bevel gear differential.
8 special oil-filled shock absorber.
Aluminum chassis.
TECHNICAL PARAMETERS:
Length--------------------------490 mm
Width---------------------------380 mm
Height---------------------------225 mm
Wheelbase----------------------310 mm
Tread(F/R) ----------------------380 mm
Wheel Diameter ---------------156 x 86 mm
Gear Rate -----------------------H16.5:1 L24.1:1
Weight---------------------------3.55 kg
Engine----------------------------18CXP
START THE ENGINE:
1. The process of cleaning before starting your car:
for cleaning the engine,1-2 tank oil's use is a standard,
and then run your car slowly to run out of another 1-2 tank oil,
all ways down,the cleaning work is over,the car can run normally;
2. Turning on the transmitter and the receiver:
extend the antenna of the transmitter and the receiver,
and then switch on the transmitter and the receiver in succession;
while switching on the receiver,
make sure the carburetor is at the neutral position.
3. Fill the fuel:
fill the special model's fuel,and mix the gas and the lubricating oil,
the rate of the gas to the lubricating oil is 25:1;
close the fuel tank's cover and fasten it after it after filling the fuel.
4. Starting the engine:
push the front valve several times until securely streaming out oil;
shut down the wind gate,and turn the accelerograph to
the position that spaces 1/4-1/3 place of opening;
pull the pulling-start rod until engine send out sound of start to start
engine adjust the wind gate to the place which spaces 1/4 poistion of
opening position;
pull the pulling-started rod quickly;
start engine several minutes to prewarm.
5. Stop the engine:
the engine will immediately stop running as long as you press the stall
switch of the engine,please refer to the instruction manual(g230 RC)
for more details.
The servo must be set at the center position befor installation,
to set the neutral turn on the transmitter and receiver,
set the trim tabs in the center position,
and turn off the receiver and transmitter in succession,
the servo will be in the proper neutral position for installation.
1/8 SMT 4WD MT w/ 25CXP GO engine & 2.4G radio transmitter
RTR
1.Powerful 25CXP engine with pull-starter
2.Selaled gear box with automatic 2 speed transmission
3.High quality aluminum chassis,one-body formed construction is used to ensure the strength
4.4WD system,front/rear diff gear unit
5.4 horizontal oil-filled shock absorber
Length.........................510 mm
Width...........................435 mm
Height..........................230 mm
Wheelbase...................350 mm
Wheel Diameter...........154*85 mm
Gear Rate.....................L26.8:1 H17.1:1
Weight..........................4800 g
Engine...........................GO 25 CXP
1/8 HSP Rattlesnake PRO Nitro Off Road Truck w/21 or 28CXP engine & 2.4G radio
RTR
Pay with Paypal
Specifications:
Length:521mm
Width:380mm
Height:250mm
Wheelbase:335mm
Ground Clearance:58mm
Gear Ratio:1：22.7(L)1:16.5(H)
Dia/Width Of wheel:ø150*90mm
Engine:21 or 28/cxp
FEATURES
1.Two speed transmission
2.Extra Length Aluminum 6061 Chassis
3.Compact front/Rear bumper provides protecting against impacts
4.High quality main gear/differential gear
5.Oil filled adjustable shock absorber
6.High performance 21CXP or 28CXP engine
7.Front/Rear sway bar Link
8.Powerful disc brake system provides quick brake response
9.High quality optional Air filter
10.Aluminum polished Exhaust Pipe
1/8 HSP Tornado Nitro Off Road Monster Truck w/28CC engine & Radio
RTR
Pay with Paypal
FEATURES:
1. Four wheel drive system
2. Powerful Suspension arm with adjustable width
3. High quality main and diff. gears
4. 6061/T6 anodized aluminum radio tray and chassis
5. Solid universal joint cups/High quality ball bearings complete
6. Large off road monster tires and spoke wheel rims.
7. Disc brake system provides quick brake response
8. Extra large leak proof fuel tank with spring loaded fill cover and a
long fuel pipe for quick re-fueling.
9. High flow duty foam air filter (Anodized aluminum capped cover is
for optional use)
10. Polished exhaust pipe and manifold
11. 6 mm aluminum rear sway arm
1/8 SMT WarLord Nitro Off-Road MT RTR W/25CXP GO engine & 2.4G Radio
RTR
Pay with Paypal
FEATURES
1. 25CX ENGINE WITH PULL-STARTER
2. EQUIPPED WITH AIR FILTER AND ALUMINUM EXHAUST PIPE
3. HIGH EFFICIENCY SHAFT DRIVE STYLE 4WD SYSTEM
4. HIGH CAPACITY 150CC FUEL TANK
5. OIL-FILLED ALUMINUM SHOCK ABSORBER
6. SENSITIVE DISC BRAKE SYSTEM
7. C-HUB STEERING
TECHNICAL DATA
Length…………………………… 544mm
Width………………………………412mm
Height………………………………236mm
Wheelbase (F)……………………350mm
Wheelbase (R)……………………350mm
Thread (F/R)…………………………402/412mm
Wheel ………………………………Φ141*77mm
Gear Rate……………………………15.8:1
Weight…………………………………4.2kg
Engine…………………………………GO 25CXP