Home > Radio Transmitter > Gyros
Gyros
Special Flymentor 3D for Helicopter
Special Flymentor 3D for Helicopter
| Product Description : |
The functions of Flymentor: New type of sensing process provides reliable geographical positioning, completely independent of the visible horizon.
Particular CCD sensor can catch the ground picture to compare, and prevent helicopter from drifting.
Adjust the working status of Flymentor by AUX Channel, switchable gain system offers three different positions: Off, stabilisation and Position-holding mode.
Head lock gyro outside setting and Swashplate mixer.
Control the sensitivity and mode of gyro by GEAR Channel.
Support helicopters with 3S 120?㳷ashplate,or 3S 140?㳷ashplate,or 4S 90?㳷ashplate, or 4S 90?㫴5?㳷ash plate.
Attitude stabilisation in inverted flight.
Set Flymentor by computer USB adapter.
If you use FM/PPM radio equipment, Flymentor will make the ailerons, elevator and tail servo back immediately. The pitch will remain in the final signal position. And Flymentor will switch to position mode automatically. The sensitivity is 70% |
KDS KDS800 Digital Locked Gyro
KDS KDS800 Digital Locked Gyro
Dimension(mm):28x28x18
Digital proportional R/C system
Operating voltage:4.8V-6V (common for receiver)
Operating current:80mA
Functions:
Minimizes changes in an aircraft attitude by wind erc
Angular acceleration commands used
Sensor vibration proofing
Simple sensitivity adjustment |
HG830 High Performance Gyro
HG830 High Performance Gyro
The HG830 is a high performace, compact, light weight GYRO with AVCS and a Fuzzy PID
control system designed for Model Helicopters. Because the sensor and control circuitry are
integrated, it is simple to install. Gyro performance largely depends on the servos used, the higher
the speed and response of the servos the better the Gyro sensitivity and perfomance. A high-speed
digital servo (over 0.1sec/60ْ) is recommended.
Features
Fuzzy PID control System - Uses a control algorithm to reduce drift causing by temperature
changes.
AVCS System - Rudder trim changes are automatically corrected, tail (rudder)
operation is simplified for improved 3D flight.
Digital Servo compatible (DS mode) - DS mode is compatible with digital servos.
Remote gain function - Remote gain function allows sensitivity switching from the transmitter.
Mode switching function - Mode switching function allows AVS/normal gyro mode reversal.
Limit trimmer - Sets the maximum travel of the rudder servo.
Response-speed Trimmer - Sets the operation speed to fit different servos
Integrated, Compact and lightweight - Compact size (25X25X19MM) and light weight (18g)
utilize high density mounting technology
Metal hard case – A metal hard case protects the Gyro from impact and improves EMC
(electrostatic and electromagnetic interference) resistance.
Specification
Operating Voltage: DC 2.5 ~ 6.0V
Operating Current: 8mA @ 5.0V
Operating Temperature：-5℃ ~ +45℃
Dimension：25 x25 x19 mm
Weight :18g